What is a EV DC Fast Charger?
DC charging post is a specialized DC device that connects electric vehicles directly to the AC/DC grid (power supply) side and is installed with a control guide to ensure reliable connection between the charging post and the electric vehicle and charging safety, etc. It also integrates functional modules including HMI interaction system, charging management system such as OCPP, local and remote communication interfaces to facilitate the use and management of this specialized equipment.
The DC charging post provides DC power to the EV battery pack, and under the management of the on-board BMS system, the energy recharge of the EV is finally realized.
Features of 150kW CCS 2 PLUGS EV DC Fast Charger
EV DC fast charger will replace AC charger in the future and becomes best choice for most electric vehicles charging.
While AC charger provides home and slow charging, which adopts usually 220V single phase AC input, DC charger usually require inputs of 480+ volts and 100+ amps (50-60 kW). It can produce a full charge for an EV with a 100-mile range battery in slightly more than 30 minutes (178 miles of electric drive per hour of charging). Now DC charger produced by Grasen reach to 150kW to 300kW.
How does 150kW CCS 2 PLUGS EV DC Fast Charger work?
EV DC fast charger works following 4 steps:
1)Low voltage auxiliary power up and hand shaking phase:
First, insert the charging plug to vehcile and make sure well connected;
Low voltage auxiliary power up, it start to supply power to BMS;
Insulation monitor detection/IMD(charger high voltage output against earth)
BMS send message, including information such as battery type, battery power, voltage, manufacturer, charging time, charger identification code;
2)Charging parameter starts to configure:
BMS send single battery information(maximum charging voltage and current allowed)
Battery norminal power
Maximum charging voltage allowed
Maximum temperature allowed
Battery group state of charge
Battery current voltage
Charger sending maximum output power(maximum output voltage, minimum output current, maximum output current)
BMS send battery charging request timely(voltage, current, charging mode: constant voltage or constant current);
Charger adjust voltage and current according to request;
BMS set charging completion conditions;
When BMS request voltage and current is 0, charger output as per the minimum output capability;
BMS send battery condition during charging process, making charger identify battery charging voltage and current during charging process,charging voltage measurement value(V), charging current measurement value(A),maximum single battery voltage, current SOC(%) and estimated charging time left(min);
3)Charging Completion Phase:
BMS send charging statistics,such as SOC, battery voltage, battery temperature;
Charger send output power, charging time, charger serial number;
Stop auxiliary low voltage power output;
4)End charging process;
Charging follows curve,charging starts slow while your car monitors several factors (from your battery's charge level to the weather outside), climbs to peak speeds for as long as possible and slows down again around 80% to prolong battery life.
How quick is 150kW CCS 2 PLUGS EV DC Fast Charger?
150kW CCS 2 PLUGS EV DC Fast Charger can realize intelligent charging and can charge to 80% within 30 minutes and charge fully within 1 hour.Usually it equips with two charging plugs and when charging at the same time, it will share equal charging power 75kW.When battery has higher power,it will affects charging speed.
Application of 150kW CCS 2 PLUGS EV DC Fast Charger
High mobility parking lot;
Convenient gas station;
Highway service area;
Locations which requires rapid charging;
4S retails shops;
Commuter buses or vehicles for passengers;
Mining projects for heavy electric vehicles;
Medium and large van;
150kW CCS 2 PLUGS EV DC Fast Charger Price
150kW EV DC Fast Charger by Grasen has a competitive price with high quality. It is most cost efficient product with famous brands inner parts and perfect design. The price is greatly affected by raw material, labour cost, seasonal purchase period and currency factors.
150kW CCS 2 PLUGS EV DC Fast Charger Supplier
Grasen 150kW CCS 2 PLUGS EV DC Fast Charger has perfect system design function, adopting unique air duct design and modular design;
High-end quality brand product image;
Advanced design and comprehensive safety protection;
Super compatibility and environmental adaptability;
Ultra low failure rate and long service life;
Full chain, sophisticated manufacturing process to create cost-effective products
All-weather intelligent connection, comprehensive protection, more stable, faster, more secure.
|Product Brief Introduction||Type||DC Charging Station With Two CCS2 Plugs|
|Description||150kW CCS 2 PLUGS EV DC Fast Charger|
|Electrical Index||Input Rating||3-phase 400VAC (340V-480VAC)|
|Output voltage||200~750V DC|
|Function Design||Communication interface||4G, Ethernet|
|Appearance and structure||Charging cable length||5m/7m|
|Mounting type||Floor-mounted type|
|Environment Temperature||IP class||IP55|
|Cooling method||Air cooling|
|Safety Design||Altitude||Up to 6000 feet (≤2000 m)|
|Protection function||Over voltage over current|
|Certificate||Certificate No.||50347817 001_Certificate/AN504631360001|
|Certificate||CE certified by TUV|
|User Interface & Control||Support Language||English, Spanish, or other languages required|
|Push Buttons||Emergency stop|
|User Authentication||RFID card reader, user name & password, mobile No. & pin code|
Very satisfied with the quality of the product and the suppliers service. The product was delivered in good package. Will definitely purchase from this supplier again.
-- Marcus Groll，A Charging Station Owner in UKRAINE
Start your EV charging station businesses with Grasen. For a no-obligation quote, hit the button below, fill in your details, and we’ll get back to you.